Universal boiler type Pellpal D 20kW for firewood 5thclass EcoDesign

Heating boiler type Pellpal D designed for heating with firewood in residential, workshop and other houses.

  • Energy efficiency class: A+
    • 9,000.00 zł
    • szt
    • Payment in cash, Payment via bank transfer, eRaty Santander Consumer Bank, Przelewy24, Płatności Ratalne i odroczone
    • Check installments

    The product is shipped within 24 hours.

    Nominal boiler power [kW]: 15
    Basic fuel: hardwood type A with a moisture content of 12-20%
    Area of ​​the heated room [m2]: 100-200
    Water capacity: 70
    Chimney draft [mbar]: 0,27
    Working pressure [bar]: 1,5
    Water test pressure [bar]: 4
    Charging chamber capacity [liter]: 53
    max. operating temperature [C*]: 90
    Total width [mm]: 497
    Depth [mm]: 635
    Height [mm]: 1286
    Flue outlet diameter [mm]: 155
    Connections [mm]: DN 50 (lub na zamówienie)
    Power supply [A/W]: brak

    The PellPal D boiler with a power of 20 kW is a device used to heat rooms with an area of 100 to 160 m2 and to heat water in domestic hot water systems. It is designed for burning logs of deciduous wood such as beech, oak, birch, hornbeam, etc.
    The 20 kW PellPal D boiler has a high efficiency of up to 91.4%. In tests, it obtained class 5 according to EN 303-5 and meets the requirements of ecodesign (EcoDesign). The energy class of the boiler is A+. The boiler achieved very low PM emissions below 20 mg/m3.
    The boiler can operate in an open system equipped with an open expansion vessel as well as in a closed system when the heating system is equipped with the necessary elements such as an external cooling coil, DBV 2 safety valve, SYR 5067 thermal protection valve, expansion vessel. Depending on the selected method of protection, appropriate elements should be used. The system in which the boiler is to operate must be equipped with an accumulation tank with a minimum capacity of 672 liters.

    Drewno - ekologiczne paliwo

    Firewood is a natural and ecological source of energy. Used for years for heating purposes, it should undergo a series of preparatory treatments. Wood intended for combustion should be cut and chopped into logs suitable for the boiler furnace. The most important is the so-called seasoning of wood, i.e. its proper drying. Only properly dried deciduous wood gives us the confidence that our boiler will not smoke and will be environmentally friendly.

    Most importantly, wood is characterized by a zero CO2 emission balance, which is not always obvious in the case of other forms of house heating.

     

     



    Ask a question about the product. Our team will be happy to provide a detailed answer to your inquiry.



    Wood gasification - a modern solution for home heating

    Wood gasification - a modern solution for home heating

    Nowadays, more and more people pay attention to ecological energy sources. One of them is wood gasification, i.e. the process of converting wood into gas that can be used to heat the house. In this article, we will discuss how the wood gasification process works and what equipment is needed to carry it out. We will also present the advantages and disadvantages of heating a house with gasified...
    Wood burning properties - how to use this fuel effectively in the stove?

    Wood burning properties - how to use this fuel effectively in the stove?

        Wood burning properties - how to use this fuel effectively in the stove? Wood is still one of the most popular fuels in Poland, used to heat houses and farms. Burning wood in a stove is relatively cheap and convenient for many people, but it is often associated with high emissions of harmful gases and dust that are harmful to the environment. So let's analyze how to effectively...
    Solid fuel boilers: pellets, wood, coal - how to get used to them?

    Solid fuel boilers: pellets, wood, coal - how to get used to them?

      Boilers for solid fuels, such as pellets, wood or coal, are very popular among users. However, the use of these boilers also presents some challenges, such as the formation of soot and other deposits, which can adversely affect their operation. In this article, we will discuss how to effectively deal with these problems and keep solid fuel boilers in good condition. Regular cleaning of the...
    Wood as fuel for the tough times

    Wood as fuel for the tough times

      Boilers Wood stove - modern low power installation solutions based on a 15 to 26 kW wood boiler Wood has been the main source of heat in our homes for centuries. Currently, thanks to modern technologies, we have wood-fired boilers at our disposal, which allow for significant savings and care for the natural environment. Increasingly, old hard coal heating is being replaced by new central...
    Instructions for installing the nozzle in the KDS+ and PellPal D boilers

    Instructions for installing the nozzle in the KDS+ and PellPal D boilers

    The sealing of the ceramic nozzle in the combustion chamber is very important. Combustible gases that collect during the gasification process must pass through the inside of the nozzle and combine with fresh air. Tightness is of great importance here. In the video, we present the correct way of sealing the nozzle and its installation in the KDS+ and PellPal D boilers.   Feel free to...
    SAFE IT INTERNET MODULE FOR PELLPAL CONTROLLER

    SAFE IT INTERNET MODULE FOR PELLPAL CONTROLLER

    Safe IT internet module for PellPal controller - information   The SAFE IT internet module is a hardware and IT solution for remote monitoring of central heating boilers. using any electronic device (laptop, computer, tablet) connected to the Internet. The SAFE IT module also allows you to set the configuration parameters of the connected controller.It is possible to add a carbon monoxide...