Heating boiler type Pellpal D designed for heating with firewood in residential, workshop and other houses.
|Nominal boiler power [kW]:||15|
|Basic fuel:||hardwood type A with a moisture content of 12-20%|
|Area of the heated room [m2]:||100-200|
|Chimney draft [mbar]:||0,27|
|Working pressure [bar]:||1,5|
|Water test pressure [bar]:||4|
|Charging chamber capacity [liter]:||53|
|max. operating temperature [C*]:||90|
|Total width [mm]:||497|
|Flue outlet diameter [mm]:||155|
|Connections [mm]:||DN 50 (lub na zamówienie)|
|Power supply [A/W]:||brak|
The PellPal D boiler with a power of 16 kW is a device used to heat rooms with an area of 100 to 160 m2 and to heat water in domestic hot water systems. It is designed for burning logs of deciduous wood such as beech, oak, birch, hornbeam, etc.
The 16 kW PellPal D boiler has a high efficiency of up to 91.4%. In tests, it obtained class 5 according to EN 303-5 and meets the requirements of ecodesign (EcoDesign). The energy class of the boiler is A+. The boiler achieved very low PM emissions below 20 mg/m3.
The boiler can operate in an open system equipped with an open expansion vessel as well as in a closed system when the heating system is equipped with the necessary elements such as an external cooling coil, DBV 2 safety valve, SYR 5067 thermal protection valve, expansion vessel. Depending on the selected method of protection, appropriate elements should be used. The system in which the boiler is to operate must be equipped with an accumulation tank with a minimum capacity of 672 liters.