Pellet boiler type PellPal 8 kW SLIM 5th class Ecodesign
The 8 kW PellPal boiler is designed for heating rooms with an area of up to 100 m2 and for heating water in domestic hot water systems. It is designed to burn biofuel - wood pellets with a diameter of 6 to 8 mm.
- Watch the product:
- Add feedback:
- Code: 0000001466
- Manufacturer: KONSTAL
-
Availability:
Exists
-
Price history
The lowest price 30 days before the change: 9,700.00 zł gross
- Energy efficiency class: A+
- 10,700.00 zł 10,500.00 zł
- szt.
- Payment in cash, Payment via bank transfer, eRaty Santander Consumer Bank, Bezpieczny, szybki przelew - Przelewy24, Płatności Ratalne i odroczone
-
Check installments
- Check installments
The product is shipped within 24 hours.
Nominal boiler power [kW]: | 8 |
Basic fuel: | Pellet |
Area of the heated room [m2]: | do 100 |
Water capacity: | 40 |
Fuel consumption - max [kg/h]: | 1,8 |
Chimney draft [mbar]: | 0,2 |
Boiler weight with burner [kg]: | 205 |
Thermal efficiency [%]: | 90,9 |
Working pressure [bar]: | 2 |
Water test pressure [bar]: | 4 |
Fuel mass in the container [kg]: | 45 |
max. operating temperature [C*]: | 85 |
Min. return temperature [C*]: | 55 |
Min. boiler water temperature [C*]: | 10 |
Total width [mm]: | 400 |
Depth [mm]: | 830 |
Height [mm]: | 1360 |
Flue outlet diameter [mm]: | 130 |
Connections [mm]: | DN25 |
Power supply [A/W]: | 1,9/350 |
Electric power consumption at 100% power [W/kWh]: | 350 |
Electric power consumption at 30% power [W/kWh]: | 15 |
Standby power consumption [W]: | 3 |
Opis |
The 8 kW PellPal boiler is designed for heating rooms with an area of up to 100 m2 and for heating water in domestic hot water systems. It is designed to burn biofuel - wood pellets with a diameter of 6 to 8 mm.
It has a high efficiency of up to 90.9%. In tests, it obtained class 5 according to EN 303-5 and meets the requirements of ecodesign (EcoDesign). The energy class of the boiler is A+. The boiler achieved a very low PM emission below 20 mg/m3, which makes it possible to obtain higher subsidies for the replacement of the boiler.
The structure is based on an exchanger with horizontal convection channels. The fuel tank is located next to the boiler. In the lower door of the body there is a modern QPELL pellet burner. The fuel is supplied to the burner by a screw conveyor and poured down through a spiro pipe. The use of a spiro pipe protects the fuel tank against fire entering it. The chimney outlet (flue) is located in the upper part of the boiler body on its rear wall at an angle of 45 degrees.
The combustion process, supplying the right dose of fuel to the burner, firing up and the operation of the blower fan located in the burner are handled by the PellPal PID Pellet microprocessor controller.
The boiler can operate in an open system equipped with an open expansion vessel, as well as in a closed system, provided that the heating system is equipped with the necessary elements such as an external cooling coil, DBV 2 safety valve, SYR 5067 thermal protection valve, expansion vessel. Depending on the selected method of protection, appropriate elements should be used.
The boiler has a class 5 certificate in accordance with the PN-EN 303-5: 2012 standard and meets the conditions of Ecodesign called Ecodesign
Boiler efficiency above 90%
Possibility of installation in a closed system after installing the cooling coil
Warranty for the boiler 5 years, for the controller and the feeding system 2 years
Possibility to connect the Internet module
What furl to use?
Basic fuel
Pelets
Palnik |
Boiler regulator - controller |
Insight |
Dane techniczne |
Ask a question about the product. Our team will be happy to provide a detailed answer to your inquiry.