IBO OHI 25-40/180 circulation pump
Central heating circulation pump The IBO 25-40/180 circulating water heater is an advanced device designed specifically for the effective drive of water circulation in central heating systems, especially in single-family houses. Durable construction materials such as a noryl impeller and a ceramic shaft allow the pump to withstand high temperatures and pressures. You can adjust its operation thanks to three rotational speeds and enjoy the standard spacing of connections, which makes installation easier. It is also known
OHI circulating pumps have been specially designed to stimulate water circulation in small and medium-sized central heating circuits, mainly used in single-family buildings. These pumps are dedicated to water circuits only.
The pumps are configured to operate with a maximum water temperature of 110ºC and a maximum pressure in the central heating system of 10 bar.
Please note that OHI pumps are not suitable for use in circuits containing substances other than water, such as glycol or transformer oil, and their use in such conditions is not recommended.
In addition, OHI pumps are not intended for use in water circuits that may contain solid contaminants such as rust or lime scale. In order to protect the device from potential impurities, a sediment filter should always be installed upstream of the pump.
The unique materials of construction of the pump guarantee its durability at high temperatures and under high pressure.
The advantages of the product are:
- Robust and proven construction materials such as noryl impeller, ceramic shaft and cast iron body.
- The ability to adjust the rotational speed in three ranges.
- Standard connection spacing of 180 mm.
- Simple and quick assembly process, complete with gaskets.
- Low power consumption.
- Reliability in operation.
- Resistance to corrosion.
- Quiet operation of the pump.
Technical data of the central heating circulation pump IBO 25-40/180:
- Capacity: 48 L/min.
- Lifting height: 4.5 m.
- Power supply: 230V.
- Engine power:
- I gear: 38W.
- 2nd gear: 53W.
- 3rd gear: 72W.
- Current:
- I gear: 0.16A.
- 2nd gear: 0.23A.
- 3rd gear: 0.31A.
- Mounting spacing: 180 mm.
- Maximum water temperature: 110ºC.
- Maximum pressure of the central heating system: 10 bar.
The product is sold in a new condition, in the original packaging, and is covered by a 24-month warranty.
by low power consumption and quiet operation. It is a reliable solution for central heating, covered by a 24-month warranty, ready to work with a sediment filter, ensuring clean and efficient water circulation in your system.
- Watch the product:
- Add feedback:
- Code: OHI25-40/180
-
Availability:
Exists
-
Price history
The lowest price 30 days before the discount: 450.00 zł gross
- 140.00 zł
- pcs.
-
Payment in cash, Payment via bank transfer, eRaty Santander Consumer Bank, Przelewy24, Płatności Ratalne i odroczone
-
Check installments
The product is shipped within 24 hours.
| Maximum performance: | 4,0 m |
| Maximum flow: | 2.600 litr/h |
| Input power:: | 3-23W |
| Regulation: | 3 Stałe charakterystyki, 4 Charakterystyki proporcjonalne obniżenie nocne, |
| Supply voltage: | 1 x 230V, 50 Hz |
| Engine protection: | nie jest wymagana zewnętrzna ochrona silnika |
| Protection method: | IP 42 |
| Ambient temperature: | 0 °C do +40 °C |
| Medium temperature: | +5 °C do +110 °C |
| Maximum system pressure: | 10 barów |
| Connection size: | 1 1/2" |
| Installation length: | 180 mm |
| EEI: | ≤ 0,20 |
OHI circulating pumps have been specially designed to stimulate water circulation in small and medium-sized central heating circuits, mainly used in single-family buildings. These pumps are dedicated to water circuits only.
The pumps are configured to operate with a maximum water temperature of 110ºC and a maximum pressure in the central heating system of 10 bar.
Please note that OHI pumps are not suitable for use in circuits containing substances other than water, such as glycol or transformer oil, and their use in such conditions is not recommended.
In addition, OHI pumps are not intended for use in water circuits that may contain solid contaminants such as rust or lime scale. In order to protect the device from potential impurities, a sediment filter should always be installed upstream of the pump.
The unique materials of construction of the pump guarantee its durability at high temperatures and under high pressure.
The advantages of the product are:
- Robust and proven construction materials such as noryl impeller, ceramic shaft and cast iron body.
- The ability to adjust the rotational speed in three ranges.
- Standard connection spacing of 180 mm.
- Simple and quick assembly process, complete with gaskets.
- Low power consumption.
- Reliability in operation.
- Resistance to corrosion.
- Quiet operation of the pump.
Technical data of the central heating circulation pump IBO 25-40/180:
- Capacity: 48 L/min.
- Lifting height: 4.5 m.
- Power supply: 230V.
- Engine power:
- I gear: 38W.
- 2nd gear: 53W.
- 3rd gear: 72W.
- Current:
- I gear: 0.16A.
- 2nd gear: 0.23A.
- 3rd gear: 0.31A.
- Mounting spacing: 180 mm.
- Maximum water temperature: 110ºC.
- Maximum pressure of the central heating system: 10 bar.
The product is sold in a new condition, in the original packaging, and is covered by a 24-month warranty.
Ask a question about the product. Our team will be happy to provide a detailed answer to your inquiry.
