CX80 high temperature silicone red 380°C, 310ml

CX80 Professional Silicone is a modern, single-component silicone sealant that is exceptionally resistant to extreme temperatures, both low (-65°C) and high (+380°C). Thanks to its permanent elasticity and rapid hardening in reaction with atmospheric moisture, it creates a non-shrinking mass resistant to UV radiation. The product is perfect for sealing and gluing various surfaces, including glass, ceramics, aluminum and metal. It is ideal for sealing engine elements, heating devices, fireplace casings and chimney and ventilation ducts.

  • Watch the product:
  • Add feedback:
  • Code: CX-80_310ML_SILIKON_380ST_CZERWONY
  • Availability: Exists Exists

  • Price history
  • 32.00 zł
  • pcs.
  • Payment in cash, Payment via bank transfer, eRaty Santander Consumer Bank, Przelewy24, Płatności Ratalne i odroczone
  • Check installments

The product is shipped within 24 hours.

 

Product description

 

CX80 Silicone is a flexible silicone sealant that withstands extreme temperatures, from -65°C to +380°C. It cures quickly in contact with moisture, creating a durable, non-shrinking mass resistant to UV radiation. Ideal for sealing and bonding surfaces such as glass, ceramics, aluminum and metal. It works well in a variety of applications, including engines, heating systems, fireplaces, chimneys and ventilation ducts.

 

Technical data:

- Temperature range: -65°C to +380°C
- Resistance to grease and oils
- Fast curing
- Flexible, non-shrinking joint
- UV resistance
- Excellent adhesion to glass, ceramics, aluminum and metal
- Consistency: paste
- Curing system: acetate
- Application temperature: +5°C to +40°C (curing at lower temperatures is significantly slower)
- Adaptation to movement: 20%
- Volume reduction after curing: <3%
- Processing time: 10-20 minutes
- Curing rate: 3.0 mm/24 h (depending on joint thickness, ambient temperature and air humidity)

 

How to use:

1. Thoroughly clean, degrease and dry the surfaces.

2. To obtain an even joint line and protect it from dirt, it is recommended to cover the gap with masking tape.

3. Cut off the cartridge outlet above the thread and attach a tip cut at an acute angle to it, adjusted to the width of the joint.

4. Insert the cartridge into the squeezer and apply the joint.

5. Smooth the joint with a spatula soaked in soapy water and remove the masking tape immediately after finishing.

 



Ask a question about the product. Our team will be happy to provide a detailed answer to your inquiry.